Emerson Rosemount 3308 Series Reference Manual page 207

Reference Manual
00809-0100-4308
Table D-1: Typical Interface Conditions
Option
Unknown or Other condition
Layer on top (thin)
Layer at the bottom (thin)
D.2.2 Manual setup - device
Wireless network
Network ID
Identification number that tells the device which network it belongs to. Obtained from the
network administrator.
Join key
A kind of password that the device uses to join the network. Obtained from the network
administrator. All sections must contain the same number of characters.
Broadcast information
Message content
Which content (HART command) to broadcast for a message.
Message variables
Which variables that are included in the content.
Trigger mode
How message will be triggered.
Trigger level
At which level message will be triggered.
First and trigger variable
The 1st variable contained within message which also will be used to trigger a broadcast.
Triggered update rate
This defines how often the broadcast message is sent to the gateway after a user defined
trigger level threshold has been crossed. Faster update rates have an impact on the total
communications traffic on the network, and power module life.
Reference Manual
Configuration parameters
Description
The typical interface condition is unknown, or
varies in such a way that no typical interface
condition can be stated.
The interface thickness is typically thin
compared to the bottom layer. The tank mostly
contains the bottom product.
The interface thickness is typically thick
compared to the bottom layer. The tank mostly
contains the upper product.
February 2020
207