Emerson Rosemount 3308 Series Reference Manual page 87

Reference Manual
00809-0100-4308
• In the Wireless Gateway's integrated web interface
• Using the handheld communicator
If the Rosemount 3308 Series was configured with the Network ID and Join Key, and
sufficient time has passed, the transmitter should be connected to the network. It usually
takes a few minutes for the device to join the network. If the device has not joined the
network, see
Verify by device display
Procedure
1. Unscrew the device display cover.
2. Press the DIAG button. The display will show: Tag, Device Serial Number, Software
Reference Manual
Table 6-10.
Revision, Network ID, Network Connection Status, and Device Status screens. Refer
to Table 5-1.
When the network diagnostic status is displayed as "NETWK OK", the device has
successfully joined the network. When joining the wireless network, the status
displayed will be changed through the sequence until the device finally has joined
the network. Table 4-3 presents the different network connection status screens.
Configuration
February 2020
87