Emerson Rosemount 3308 Series Reference Manual page 82

Configuration
February 2020
Table 4-2: Startup Screen Sequence
Sequence
1. All segments ON
2. Device identification
3. Device information: Tag
4. Software revision
5. Device information: Status
6. Primary variable
82
Description
Used to visually determine if there
are any bad segments on the device
display.
Identification string used to
determine the device type.
User entered tag, 8 characters long.
This screen will not display if all
characters are blank.
Used to determine device software
revision.
This screen will only appear if there
is a critical error which may prevent
the device from operating correctly.
Check additional status screens for
more information about failure
source, refer to Table 5-1.
Measurement value of mapped
primary variable.
Reference Manual
00809-0100-4308
Screen
Rosemount 3308 Series