Emerson Rosemount 3308 Series Reference Manual page 90

Configuration
February 2020
Verify with AMS Wireless Configurator
Procedure
• Start the AMS Wireless Configurator. When the device has joined the network, it will
appear in the AMS Wireless Configurator window as illustrated in
Figure 4-6: AMS Wireless Configurator Screen
Figure 4-7
the AMS Wireless Configurator Overview screen.
Figure 4-7: Network Connection Status Images
Not Connected
Limited Bandwidth
Verify by Gateway
Procedure
1. To use the Wireless Gateway's integrated web interface, navigate to the Explorer →
2. Locate the device in question and verify all status indicators are good (green).
90
presents the different network connection status images that are shown in
Status page as shown in
This page shows whether the device has joined the network and if it is
communicating properly.
It may take several minutes for the device to join the network and be seen on the
Gateway's integrated web interface.
Searching
Connected
Figure 4-8.
Reference Manual
00809-0100-4308
Figure 4-6.
Joining
Rosemount 3308 Series