Emerson Rosemount 3308 Series Reference Manual page 224

Wireless guided wave radar
Table of Contents

Advertisement

Alert message mapping
February 2020
Table E-1: Device Variables
Index
Device variable
12
Signal Quality
13
Surface/Noise Margin
(1)
Requires option code DA1 (HART Diagnostics).
Table E-2: Failure Alerts (F:)
Message
Electronics Failure
Radio Failure
Supply Voltage Failure
Probe Disconnected
Electronics Temperature Critical
Configuration Error
(1)
Location of the Alert in the HART command 48 Additional Status field.
Table E-3: Maintenance Alerts (M:)
Message
Supply Voltage Low
Electronics Temperature Out of Limits
Level Measurement Lost
Simulation Active
224
(continued)
Description
(1)
The quality of product surface echo signal
compared to surface threshold and noise.
(1)
Margin between product surface echo
signal and noise. Zero indicates a low
margin and 10 a high margin.
Additional status
Byte 8::Bit 6
Byte 1::Bit 6
Byte 6::Bit 2
Byte 4::Bit 6
Byte 1::Bit 3
Byte 2::Bit 6
Additional status
Byte 8::Bit 4
Byte 1::Bit 2
Byte 3::Bit 1
Byte 8::Bit 0
(1)
Description
An electronics error that could impact the
device measurement reading has occurred.
The wireless radio has detected a failure or
stopped communicating.
The supply voltage is too low and will affect
device operation.
The device cannot detect the probe.
The internal temperature of the device has
reached critical levels and the integrity of the
device electronics may be compromised.
Environmental temperature should not
exceed device specifications.
The device has detected a configuration
error. Reasons may be multiple. See
for a list of detailed Configuration Errors that
may be displayed.
(1)
Description
The supply voltage is low and may affect
Device Operation.
The temperature of the electronics board has
exceeded the transmitter's operating range.
No valid Level reading. Reasons may be
multiple:
No valid surface echo peak in the
measuring range.
Incorrect transmitter configuration.
The device is in simulation mode and is not
reporting actual information.
Reference Manual
00809-0100-4308
Default mapping (user
configurable)
Table 6-3
Rosemount 3308 Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rosemount 3308a

Table of Contents