Installation
February 2020
6. Tighten the nut.
Postrequisites
Continue with the grounding step.
3.7.3
Tank connection with loose flange (plate design)
The transmitter is delivered with head, flange and probe assembled into one unit. If, for
some reason, these parts have been disassembled, mount the transmitter as described
below.
Prerequisites
Note
PTFE covered probes must be handled carefully to prevent damage to the coating.
Procedure
1. Mount the flange on the probe and tighten the flange nut.
2. Place a suitable gasket on top of the tank flange.
52
Torque 30 Lbft (40 Nm)
60 mm
60 mm
Reference Manual
00809-0100-4308
Rosemount 3308 Series