Reference Manual
00809-0100-4418
3.4
Mount the process seal antenna
3.4.1
Mount the flanged version
Procedure
1. Lower the transmitter into the nozzle.
2. Tighten the bolts and nuts (see
3.4.2
Torque specifications
The conditions used for the calculation are:
Rosemount 3408 Level Transmitter
Note
Be careful not to scratch or otherwise damage the PTFE sealing.
Note
•
Re-tighten after 24 hours and again after the first temperature cycle.
•
Check at regular intervals and re-tighten if necessary.
Table
3-5).
Mechanical installation
September 2022
21