Installation
February 2020
5. Cut the probe at the mark.
6. Fasten the weight with the following torque:
Postrequisites
After shortening the probe be sure to update the transmitter configuration to the new
probe length.
Related information
Probe length
Shorten the rigid single lead probe
Prerequisites
The minimum probe length is 15.7 in. (400 mm).
Note
The PTFE covered probes must not be cut in field.
36
•
Small weight (W1): 5 Nm
•
Short weight (W2): 5 Nm
•
Heavy weight (W3): 5 Nm
•
Weight, flexible twin: 6 Nm
Reference Manual
00809-0100-4308
Rosemount 3308 Series