Emerson Rosemount 3308 Series Reference Manual page 84

Configuration
February 2020
4.6.2 Connect to device
Procedure
1. Connect a handheld communicator or a HART
2. Do one of the following:
Related information
AMS Wireless Configurator (version 12.0 or later is required)
Handheld communicator
4.6.3 Configure update rate
The Update Rate is the frequency at which a new measurement is transmitted over the
wireless network. The default update rate is one minute. This may be changed at
84
terminals as shown in Figure
• AMS Wireless Configurator:
a. Start AMS Wireless Configurator.
b. Select View → Device Connection View.
c. Double click the device under the HART modem.
• Handheld communicator:
— Turn on the handheld communicator and connect to the device.
Figure 4-4: Connect to Device
A. Communication terminals
B. Handheld communicator
C. HART modem
®
modem to the communication
4-4.
Reference Manual
00809-0100-4308
1 2 3
4 5 6
7 8 9
0
Rosemount 3308 Series