Electrical system
Front side
TABLE A - COLUMN LIGHT SWITCH / RIDE BY
WIRE
•
Route the right hand column switch (1)
and Ride by Wire gas control grip (2)
wiring harness behind the front brake
pipe (3).
•
Route the left hand column switch wir-
ing (4) behind the clutch pipe (5).
TABLE A1 - COLUMN LIGHT SWITCH / RIDE BY
WIRE
•
The wiring harnesses must be routed
to the left of the steering headstocks, in
particular column switch wiring har-
nesses must subsequently be routed
underneath the headstock so that are
fed out of the right hand side of the mo-
torcycle.
1) RH column light switch wiring harness.
2) GAS control grip wiring harness.
4) LH column light switch wiring harness.
6) Immobilizer antenna wiring harness.
ELE SYS - 82
SHIVER 900