Suspensions
Headlight assy.
•
Unscrew the three screws used for fas-
tening the upper steering plate.
•
Remove the upper steering plate.
•
Apply the pre-tightening torque to the
ferrule using the dedicated tool.
•
Execute two complete rotations to the
left, and two to the right.
•
Loosen the ferrule by executing a 90°
rotation, and then apply the definitive
tightening torque.
Specific tooling
020884Y 46 mm wrench for steering ferrule
•
Reposition the upper steering plate
and settle it into place by striking it gen-
tly with a rubber mallet.
SUSP - 314
SHIVER 900