SHIVER 900
•
Position a central stand in order to sup-
port the engine and a trestle under the
rear of the motorcycle in order to raise
it.
•
Lower the engine partially, unscrew the
screws (13) used to fasten the earth
cables to the engine, and remove
them.
•
Lower the engine completely, and
raise the rear of the motorcycle so that
it is possible to remove the engine
completely.
Installing the engine to the vehicle
NOTE
IN ORDER TO INSTALL THE ENGINE ON THE VEHICLE, REPEAT THE "REMOVING THE ENGINE
FROM THE VEHICLE" PROCEDURE IN REVERSE ORDER, AND CARRY OUT THE "PREPARING
THE VEHICLE" PROCEDURE.
See also
Removing the engine from the vehicle
Vehicle preparation
Engine from vehicle
ENG VE - 205