APRILIA SHIVER 900 Service Station Manual page 369

SHIVER 900
P.A.D.S. characteristic.
Front bleed
Rear bleed
Encoding
Modulator
MODULATOR REMOVAL
•
Remove the fairing lug.
•
Release clamp (1) and disconnect con-
nector (2).
•
By unscrewing the nuts, remove and
plug the brake oil pipes following this
sequence: (3) - (4) - (6) - (5).
•
Slide off the rear system pipes from the hooks (7).
•
Undo and remove the three screws,
collect the washers and remove the
ABS modulator.
ADJUSTMENTS
Value/example Units of
measure
ment
- -
- -
Notes
-
-
Resets the vehicle code and obtains it automati-
cally from the CAN line at the next key ON
BRAK SYS - 369
Braking system