SHIVER 900
•
Remove the screw (15) used to fasten
the pinion, retrieving the washer (16)
and the spring washer (17) and taking
care to reposition them correctly during
reassembly.
•
Remove the pinion (18) and detach the
drive chain (19).
•
Working on both sides of the vehicle, remove the screws (20) used to fasten the ABS sup-
port, taking care to retrieve the spacer (21).
•
Access the left hand side of the motor-
cycle and remove the screw (22) used
to fasten the cable clamp positioned
inside the frame, on the left hand side.
Engine from vehicle
ENG VE - 201