Electrical system
•
At this point, on the digital display of the
motorcycle, after the automatic restart
of the dynamic presentation screen, a
message will appear with a countdown
of 20 seconds to insert the second key
to be programmed.
•
Set key to "OFF", insert the second key
and set to "ON".
CAUTION
IF YOU DO NOT HAVE A SECOND KEY OR YOU DON'T
WANT TO STORE ONE, THE DIAGNOSTIC TOOL WILL
SHOW AN ERROR SAYING "1 KEY STORED"
•
The second key is stored and you will
be asked to enter the third key (if you
have one). The same operation will be
repeated to store the fourth key.
•
To complete AND end the memorisa-
tion procedure, set key to "OFF".
•
You should then test the correct func-
tioning of all keys stored.
Diagnosis
•
In case of malfunction of certain or-
gans, the digital display of the instru-
ment panel may display errors. To
check and diagnose the specific com-
ponent, check the dedicated section.
ELE SYS - 118
SHIVER 900