Braking system
Removal
•
Turn the pins and remove both cotter
pins.
•
Remove both pins.
•
Collect the anti-vibration springs.
•
Extract one pad at a time.
CAUTION
AFTER REMOVING THE PADS, DO NOT OPERATE THE BRAKE LEVER OR THE CALLIPER
PLUNGERS COULD GO OUT OF THEIR SEATS RESULTING IN BRAKE FLUID LEAKAGE.
Installing
•
Insert two new pads, placing them so that the holes are aligned with the calliper holes.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY ARE CORRECTLY POSITIONED IN-
SIDE THE CALLIPER.
•
Position the anti-vibration plate.
•
Insert both pins.
•
Position both split pins.
•
Abut the plungers against the pads,
acting on the brake pump lever several
times.
•
Check the brake fluid level in the res-
ervoir.
BRAK SYS - 376
SHIVER 900