APRILIA SHIVER 900 Service Station Manual page 347

SHIVER 900
Stand
Pos. Description
1 Flanged, hex. head screws used for
fastening the stand plate to the en-
gine
2 Screw for fastening the stand to the
plate
3 Low profile nut used for fastening the
stand to the plate
4 Cyl. head, hex. socket screws used
for fastening the stand switch
5 Self-locking, low profile nut used for
fastening the stand switch
Side stand
•
Release the two side stand support
springs (1) and remove them.
S
TAND
Type Quantity
M8x30 3
M10x1.25 1
M10x1.25 1
M5x16 2
M5x16 2
Torque
25 Nm (18.44 lb ft)
10 Nm (7.38 lb ft)
30 Nm (22.13 lb ft)
7 Nm (5.16 lb ft)
7 Nm (5.16 lb ft)
CHAS - 347
Chassis
Notes
-
-
-
-
-