SHIVER 900
Seat
•
Rest the vehicle on its stand.
•
Insert the key (1) in the lock.
•
Turn the key (1) anticlockwise, pull out
and lift the saddle (2).
There is a handy document/tool kit compartment
in the vehicle tail fairing. Remove the saddle (2) to
reach it.
To lock the saddle (2):
•
Move the saddle (2) so that the front
retainers fasten correctly.
•
Press on the middle of the saddle (2),
at the rear fasteners, to insert them
correctly.
•
Press down and push the saddle (2)
forwards, engaging the lock.
CAUTION
BEFORE LOWERING AND LOCKING THE SADDLE,
CHECK THAT THE KEY HAS NOT BEEN LEFT IN THE GLO-
VEBOX / TOOL KIT COMPARTMENT.
BEFORE SETTING OFF, MAKE SURE THAT THE SADDLE
IS CORRECTLY LOCKED INTO POSITION.
Bodywork
BODYW - 401