Panasonic Elite Big PAC-i S-200PE3E5B Technical Data & Service Manual page 312

3. Setting Up Remote Controller Functions
The functions of the wireless remote controller can be set on site.
(These settings are saved in nonvolatile memory in the remote controller. Therefore, the settings do not revert to
the defaults even when its batteries are changed.)
NOTE
Only service personnel should make the settings because the operation of the air conditioner may be affected,
depending on the settings made.
Furthermore, making changes to these settings may cause actual operation to deviate fromwhat is printed in the
Operating Instructions, so be sure to fully explain this to the customer.
CZ-RWS3
Miscellaneous Settings
• These settings are saved in nonvolatile memory in the remote controller, so even when its batteries are changed, the settings do not have to
be made again.
• Furthermore, making changes to these settings may cause actual operation to deviate from what is printed in the Operating Instructions, so
be sure to fully explain this to the customer.
• Do not change any settings other than those items in table below.
1. Press ,
when the unit is stopped (displaying the current time only).
2. Press /
to select setting data, and press
3. Press .
Item
Setting item
Number
1 Operation Mode
2 Flap Display
3 Select Fan Speed
4 T e m p e a r u t e r
5
Clock Display
6 Ventilation Fan Setting
7 Cool Temp Max
8 Cool Temp Min
9 Heat Temp Max
10 Heat Temp Min
8 11 Dry Temp Max
12 Dry Temp Min
13 Auto Temp Max
14 Auto Temp Min
18 Energy Saving Setting
19 ECONAVI Setting
20 nanoe X Setting
TM
*1 Set to [02: / / ] or [03:
*2 Press the function setting button for 4 seconds or longer while current time is displayed to switch the function On/Off.
Note
Make sure to fill the setting status in the check column after making changes to these settings.
and at the same time for 4 seconds or longer
Setting data
Item number
to select item number, press
.
00: / / / /
*1
01: / / /
02: / /
00: 5 levels (Cool in 5 levels) + Swing + Stop
01: 5 levels (Cool in 3 levels) + Swing + Stop
02: 5 levels (Cool in 3 levels) + Swing
00: 5 levels (1 to 5, Auto)
01: 3 levels (Low (1), Medium (3), High (5), Auto)
02: 3 levels (Low (1), Medium (3), High (5))
D s i p a l y 0 0 ° : C
00: 24-hour
00: Off
*2
5 – 35°C
5 – 35°C
5 – 35°C
5 – 35°C
5 – 35°C
5 – 35°C
5 – 35°C
5 – 35°C
0 : 0 O f f
*2
00: Off
*2
00: Off
*2
/ ] if you are using the unit only for cooling.
1
1
/
2
Setting data
03: /
04: / / /
05: / /
03: Swing
04: No switchable function
03: Low (1), Medium (3)
04: No switchable function
0 : 1 F °
01: AM/PM
01: On
0 : 1 O n
01: On
01: On
8-36
2
1
2
3
Factory setting Check
00: / / / /
00: 5 levels
(Cool in 5 levels) +
Swing + Stop
00: Speed 5
(1 to 5, Auto)
0 0 ° : C
00: 24-hour
00: Off
30
18
30
16
30
18
27
17
01: On
01: On
01: On