Panasonic Elite Big PAC-i S-200PE3E5B Technical Data & Service Manual page 147

■
Thermal Insulation Kit
CZ-INSU3
Installation Instructions
Parts installed on the indoor unit
● Details of parts
Part
Side panel insulator
name
Perforations
Shape
Slit
No. of
1
parts
Part
Side panel insulator
name
Perforations
Shape
No. of
1
parts
Part
Ceiling insulator
name
Shape
No. of
1
parts
● Procedure for attaching the parts
* Indoor unit has two kinds of heights.(Large unit=319mm, Small unit=256mm)
When attaching the side panel insulator to the small unit, attach it after cutting along its perforations of the
parts<1> to <5>
1. Align the slits of the side panel insulators <1> to <4> with the hanger, and attach the parts to the side panels of
the indoor unit. (Fig. 1-12-2-2-9)
2. Now attach the side panel insulator <5> to the side panel of the indoor unit. (Fig. 1-12-2-2-9)
3. Align the side panel insulator <6> with the piping cover, and attach the part. (Fig. 1-12-2-2-9)
4. Attach the ceiling insulators <7> to <9> in such a way that no gaps are left. (Fig. 1-12-2-2-10)
Do the following procedures after installing the indoor unit.
5. Attach the hanger insulators <10> to the hangers in the directions shown in the figure. (Fig. 1-12-2-2-11)
* Keep hanger insulator<10> until installing the indoor unit.
Side panel insulator
<1> <2>
Perforations
Slit
1
Side panel insulator
<5> <6>
1
Hanger insulator
<9> <10>
4
1-12-2-2-40
Side panel insulator
<3>
Perforations
Square
Slit
hole
1
Ceiling insulator
<7>
1
Installation instructions
1
Side panel insulator
<4>
Perforations
Slit
1
Ceiling insulator
<8>
1
1