Panasonic Elite Big PAC-i S-200PE3E5B Technical Data & Service Manual page 270

<Procedure of CZ-RTC5B>
1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Sel.
2 Press the
menu.
If you wish to see the next screen instantly, press
the or
Select "4. Test run" on the LCD display and press
the button.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4. Test run
Sel.
Change the display from OFF to ON by pressing
the or
button.
Test run
Change
7
, and
20:30 (THU)
Page [ ] Confirm
or button to see each
button.
20:30 (THU)
Page [ ] Confirm
button. Then press the
20:30 (THU)
Test run
ON
[ ] Confirm
TEST
[ ]
3 Press the
on the LCD display.
TEST
[ ] START
4 Press the
Test run setting mode screen appears on the LCD
display.
TEST
MODE
COOL
7-20
20:30 (THU)
START
Fig. 7-9
button. "TEST" will be displayed
20:30 (THU)
button. Test run will be started.
20:30 (THU)
FAN SPEED
FLAP