Panasonic Elite Big PAC-i S-200PE3E5B Technical Data & Service Manual page 274

Check of ECONAVI Operational Status
The status of ECONAVI operation can be checked instantly.
It is available to check the operation when installing the indoor unit.
<Procedure of CZ-RTC5B>
1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Select "0. ECONAVI info." on the LCD display and
2
press the
Maintenance func
0. ECONAVI info.
1. Outdoor unit error data
2. Service contact
3. RC setting mode
Sel.
3
Press the
menu.
Select "Status info." on the LCD display and
press the
ECONAVI info.
Setting info.
Sensor unit info.
System settings
Status info.
Sel. [
4
There are four patterns of operational status display as shown below.
(1) Under normal operation
Status info.
ECONAVI
Status
[ ] Close
State of no energy-saving operation
(2) Under temperature shift
Status info.
7
ECONAVI
Status
[ ] Close
State of energy-saving
(temperature shift) operation
, and
button.
20:30 (THU)
Page [ ] Confirm
or button to see each
button.
20:30 (THU)
] Check
20:30 (THU)
ON
Normal
20:30 (THU)
ON
Shift
Status info.
ECONAVI
Status
[ ] Close
(3) Under suspension with absentee
Status info.
ECONAVI
Status
[ ] Close
State of energy-saving (suspended)
operation
*Shows that air conditioner operation was
suspended because no person was detected
for a certain period.
This state remains until operation is restarted.
(4) Under sensor communication error
Status info.
ECONAVI
Status
[ ] Close
Shows that the connected
ECONAVI sensor is in error state.
7-24
20:30 (THU)
ON
Normal
Fig. 7-13
20:30 (THU)
ON
Vacant
20:30 (THU)
ON
Error