Panasonic Elite Big PAC-i S-200PE3E5B Technical Data & Service Manual page 275

nanoe™ X Display
When the appears on the remote controller (CZ-RTC5B), the status of the nanoe™ X can be checked
in the following way.
<Procedure of CZ-RTC5B>
1 Switch On the earth leakage circuit breaker.
2
Wait until the remote control display returns to
normal.
[ ]
START
3 Operate the unit in FAN mode.
MODE
FAN
While operating in FAN mode (more than 5 minutes
4
have elapsed), press the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Maintenance func
0. ECONAVI info.
1. Outdoor unit error data
2. Service contact
3. RC setting mode
Sel.
5 Press the or
Select "13. nanoe X" on the LCD display and press the
button.
Maintenance func
10. Set elec. consumption
11. Set touch key
12. Check touch key
13. nanoe X
Sel.
20:30 (THU)
20:30 (THU)
FAN SPEED
FLAP
, and
20:30 (THU)
Page [ ] Confirm
button to see each menu.
20:30 (THU)
Page [ ] Confirm
Maintenance func
0. ECONAVI info.
1. Outdoor unit error data
2. Service contact
3. RC setting mode
Sel.
6 Check that the nanoe™ X module status is "Normal".
The indoor unit on the display can be scrolled up or
down using
nanoe X
Unit no.
1 - 1
1 - 2
1 - 3
Scroll
The nanoe™ X module status of all indoor units will be
displayed.
Normal : The nanoe™ X module is operating normally.
Unsupported : The indoor unit is not available to the
nanoe™ X function.
*1-1 and 1-2 represent the unit number.
*In the case of "Unsupported", select "8. Detailed
settings" and check the setting data of the Code no. 9.
*If the setting data is "0000", the nanoe™ X module is
not recognized. Check the status of the connection.
If the display other than "Normal" or "Unsupported"
appears, check the Step ⑦ next page.
7-25
20:30 (THU)
Page [ ] Confirm
Fig. 7-14
/ buttons.
20:30 (THU)
Status
Normal
Not connected
Unsupported
7