Step 9 Connect I/O - American Megatrends MegaDual User Manual

Step 9 Connect I/O

Onboard Adapters The MegaDual PCI motherboard has:
two serial ports (J3B S1 and J3B S2),
a parallel port (J3A),
two Ultra Wide SCSI connectors (J15 and J16),
an IDE controller on the PCI bus (the primary IDE connector is JP7 and the secondary
IDE connector is JP8), and
one floppy controller (JP11).
Conflicts AMIBIOS minimizes conflicts between onboard and offboard I/O devices.
AMIBIOS automatically checks the adapter cards installed in the expansion slots on the
MegaDual PCI motherboard for a hard disk or floppy controller and serial or parallel ports.
Chapter 1 Hardware Installation
Cont'd
19