American Megatrends MegaDual User Manual page 76

Advanced CMOS Setup,
Block (Multi-Sector Transfer) Mode Set this option to Auto to allow block mode data transfers. The
settings are Disabled, or Auto. The Optimal and Fail-Safe default settings are Auto.
PIO Mode Set this option to Auto to allow AMIBIOS to determine the PIO mode.
programs timing cycles between the IDE drive and the programmable IDE controller. As the PIO
mode increases, the cycle time decreases.
Fail-Safe default settings are Auto.
DMA Mode Set the DMA mode to Auto to allow AMIBIOS to determine the DMA mode. DMA
mode... The settings are Auto, SWDMA0, SWDAM1, SWDMA2, MWDMA0, MWDMA1,
MWDMA2, UDMA0, UDMA1, UDMA2, UDMA3 or UDMA4. The Optimal and Fail-Safe
default settings are Auto.
S.M.A.R.T. for Hard Disks Set this option to Enabled to the SMART (Self Monitoring Analysis and
Reporting Technology) feature built into some IDE drivers. This feature can help predict
impending drive failures. The settings are Auto, Enabled or Disabled. The Optimal and
Fail-Safe default settings are Auto.
32Bit Data Transfer Set this option to Enabled to allow 32-bit data transfer. The settings are Enabled or
Disabled. The Optimal and Fail-Safe default settings are Enabled.
ARMD Emulation Type Select this setting if you are configuring an LS120, MO (Magneto-Optical), or
Iomega Zip drive. The settings are Auto, Floppy, or Hard Disk. The Optimal and Fail-Safe
default settings are Auto.
70 MegaDual PCI Motherboard User's Guide
Continued
The settings are Auto, 1, 2, 3 or 4. The Optimal and
IDE PIO mode
Cont'd