American Megatrends MegaDual User Manual page 74

Advanced CMOS Setup,
PRIMARY AND SECONDARY IDE MASTER AND SLAVE SUB SCREEN
Primary and Secondary IDE Master and Slave Settings From the IDE Configuration screen, press <Enter>
to access the sub screen for the primary and secondary IDE master and slave drives. Use
this screen to select options for the Primary and Secondary IDE drives. Use the up and
down arrow keys to select an item, and the plus (+) and minus (-) keys to change the
option setting. The settings are described on the following pages. The screen for the
Primary IDE Master is shown below.
Advanced
Primary IDE Master
-----------------------------------------
---
Device : Hard Disk
Vendor : Maxtor 7850 AV
Size : 854MB
LBA Mode : Supported
Block Mode : 8Sectors
PIO Mode : 3
Async DMA : SingleWord DMA-2
Ultra DMA : Not Supported
S.M.A.R.T. : Not Supported
------------------------------------------
--
Type
LBA/Large Mode
Auto
Block (Multi-Sector Transfer) Mode Auto
PIO Mode
DMA Mode
S.M.A.R.T.
32Bit Data Transfer
ARMD Emulation Type
©Copyright 1985-1999, American Megatrends, Inc.
68 MegaDual PCI Motherboard User's Guide
Continued
BIOS SETUP UTILITY
Auto
Auto
Auto
Auto
Enabled
Auto
Select Screen
Select Item
+- Change Option
F1 General Help
F8 Load Failsafe
F9 Load Optimal
F10 Save and Exit
ESC Exit
Cont'd