American Megatrends MegaDual User Manual page 67

Advanced CMOS Setup,
PS/2 Mouse Support Set this option to Enabled to enable AMIBIOS support for a PS/2-type mouse. The
settings are Enabled or Disabled. The Optimal and Fail-Safe default settings are Enabled.
BootUp Num-Lock Set this option to On to turn the Num Lock key On at system boot. The settings are On
or Off. The Optimal and Fail-Safe default settings are On.
Wait for 'F1' If Error Set this option to Enabled to have the system BIOS wait for any error. At this line,
you can press <F1> to enter Setup to attempt to fix the problem. If you disable this option,
AMIBIOS will not wait on an error. The settings are Enabled or Disabled. The Optimal
and Fail-Safe default settings are Enabled.
Hit 'DEL' Message Display Normally, AMIBIOS displays
Hit Del to enter Setup
while the system is doing memory initialization. If this option is disabled, this message
does not display. The settings are Enabled or Disabled. The Optimal and Fail-Safe default
settings are Enabled.
Boot To OS/2 Set this option to Yes if running OS/2 operating system and using more than 64 MB of
system memory on the motherboard. The settings are Yes or No. The Optimal and Fail-Safe
default settings are No.
Continued
Chapter 2 AMIBIOS Setup
Cont'd
61