American Megatrends MegaDual User Manual page 65

Advanced CMOS Setup,
STANDARD BOOT SETTINGS SCREEN
Standard Boot Settings You can use this screen to select options for the Standard Boot Settings. Use the
up and down arrow keys to select an item, and the plus (+) and minus (-) keys to change
the option setting. The settings are described on the following pages. The screen is
shown below.
Advanced
Standard Boot Settings
-----------------------------------------
----
Quick Boot
Pause-On Configuration Display
Boot With Minimum Memory
Display BIOS POST Messages
Display Add-On ROM Messages
------------------------------------------
--
Typematic Rate
Fast
System Keyboard
Primary Display
PS/2 Mouse Support
Bootup Num-Lock
Wait For 'F1' If Error
Enabled
Hit 'DEL' Message Display
Boot To OS/2
©Copyright 1985-1999, American Megatrends, Inc.
Quick Boot Set this option to Enabled to instruct AMIBIOS to boot quickly when the computer is
powered on. The settings are Disabled or Enabled. The Optimal and Fail-Safe default
settings are Disabled.
Pause-On Configuration Display Set this option to pause after the system configuration box appears and
before control is given to an operating system. The settings are Disabled, 2 sec, 5 sec, or
10 sec. The Optimal and Fail-Safe default settings are 5 sec.
Continued
BIOS SETUP UTILITY
Enabled
5 sec
Disabled
Yes
Yes
Absent
VGA/EGA
Enabled
On
Enabled
No
Chapter 2 AMIBIOS Setup
Allows BIOS to
skip certain
tests while
booting. This
will decrease the
time needed to
boot the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F8 Load Failsafe
F9 Load Optimal
F10 Save and Exit
ESC Exit
59
Cont'd