American Megatrends MegaDual User Manual page 56

Step 11 Connect SCSI I/O,
Single-Ended Ultra SCSI Understanding the cable requirements, termination and stub lengths is key to the
successful implementation of a Ultra-SCSI subsystem.
SCSI Cables - Up to Four Devices The total external SCSI cable length for single-ended when using up to 4
Ultra-SCSI devices (maximum. capacitance of device = 25pf) should be less than or equal
to:
(3 meter-(SCSI signal length on AMI RAID)-(SCSI length in storage
box)
= (3 meter - 0.305 meter - SCSI length in storage box)
= 2.695 - SCSI length in storage box
SCSI Cables - More than Four Devices The total external SCSI cable length for single-ended when using
from five to eight Ultra-SCSI devices (max. cap of device = 25pf) should be less than or
equal to:
(1.5 meter-(SCSI signal length on AMI RAID)-(SCSI length in storage
box)
= (1.5 meter - 0.305 meter - SCSI length in storage box)
= 1.195 - SCSI length in storage box
Spacing Devices The SCSI devices should be uniformly spaced between terminators with the end devices
located as close as possible to the terminators.
SCSI Signal Path The SCSI signal path is a controlled impedance environment with the following
characteristic impedance:
90 ohms +/- 6 ohms for the REQ and ACK signals
90 ohms +/- 10 ohms for all other signals
50 MegaDual PCI Motherboard User's Guide
Continued
Cont'd