American Megatrends MegaDual User Manual page 87

PCI/PnP Setup,
Continued
PCI LATENCY TIMERS
PCI LATENCY TIMERS You can use this screen to specify the latency timings (in PCI clocks) for PCI
devices installed in the expansion slots. To access this screen, select PCI Latency Timers
on the PCP/PnP Setup screen and press <Enter>. The following screen displays:
Device Latency Timers
Slot-1 Latency Time
Slot-2 Latency Time
Slot-3 Latency Time
Slot-4 Latency Time
Slot-5 Latency Time
Slot-6 Latency Time
Onboard USB Latency Time
Onboard LAN Latency Time
Onboard SCSI Latency Time
Default Latency Time
©Copyright 1985-1999, American Megatrends, Inc.
Slot-1 Latency Time
Slot-2 Latency Time
Slot-3 Latency Time
Slot-4 Latency Time This option specifies the latency timings (in PCI clocks) for PCI devices installed in the
Slot-1, 2, 3, and 4 expansion slots. The settings are 32, 64, 96, 128, 160, 192, 224, or 248.
The Optimal and Fail-Safe default settings are 64.
Slot-5 Latency Time
Slot-6 Latency Time This option specifies the latency timings (in PCI clocks) for PCI devices installed in the
Slot-5, and 6 expansion slots. The settings are 32, 64, 96, 128, 160, 192, 224, or 248. The
Optimal and Fail-Safe default settings are 64.
BIOS SETUP UTILITY
PCIPnP
64
64
64
64
64
64
64
64
64
64
Chapter 2 AMIBIOS Setup
Specifies in units
of PCI bus clocks
the maximum bus
access latency.
Select Screen
Select Item
+- Change Option
F1 General Help
F8 Load Failsafe
F9 Load Optimal
F10 Save and Exit
ESC Exit
81
Cont'd