American Megatrends MegaDual User Manual page 91

Power Management,
Hard Disk Time Out (Minute) This option specifies the length of a period of hard disk drive inactivity.
When this length of time expires, the computer enters power-conserving state specified in
the Hard Disk Power Down Mode option. The settings are Disabled, 1 min. (minute), 2
min, 3 min., 4 min., 5 min., 6 min, 7 min., 8 min., 9 min., 10 min., 11 min., 12 min., 13
min,14 min, or 15 min. The Optimal and Fail-Safe default settings are Disabled.
Standby Time Out (Minute) This option specifies the length of time the length of time the system needs to
be inactive before it enters standby mode. The settings are Disabled, 1 min., 5 min.,or 10
min. The Optimal and Fail-Safe default settings are Disabled.
Suspend Time Out (Minute) This option specifies the length of time the length of time the system needs to
be inactive before it enters suspend mode. The settings are Disabled, 1 min., 5 min.,or 10
min. The Optimal and Fail-Safe default settings are Disabled.
Suspend Power Saving Type The settings are C2, or S1. The Optimal and Fail-Safe default settings are S1.
Display Activity Set this option to Monitor to use display activity to wake up the system from power
management state. The settings are Ignore, or Monitor. The Optimal and Fail-Safe default
settings are Ignore.
Continued
Chapter 2 AMIBIOS Setup
Cont'd
85