American Megatrends MegaDual User Manual page 48

Step 10 Set Options on the QLogic Menu,
Configuration Settings Screen, cont'd... The settings for the selectable boot items are:
Item
Selectable SCSI Boot
SCSI Bus
SCSI Boot ID
SCSI Boot LUN
Configuration Settings Screen, cont'd... The sixth item on the Configuration Settings screen is Restore
Default Adapter Settings. After you have changed any settings, you can use this option
to restore the adapter settings to the defaults. Select Restore Default Adapter Settings
and press <Enter>. The message
Adapter Defaults Restored
appears.
42 MegaDual PCI Motherboard User's Guide
Continued
Settings
Use this to select the SCSI ID from which you
want to boot. The system boots from the
selected SCSI drive. This option applies to
disk devices, but not to CD-ROMs, tape
drives, or other nondisk devices. The settings
are Enabled or Disabled.
If you select Disabled, the system looks for an
IDE drive to boot from. If the system does not
find an IDE drive, it looks for the first bootable
SCSI drive. When this option is disabled, the
SCSI Boot ID and SCSI Boot LUN parameters
have no effect.
The settings are 0, or 1. The default setting is
0.
The settings are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13, 14, or 15. The default setting is 0.
The settings are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13, 14, or 15. The default setting is 0.
Cont'd