American Megatrends MegaDual User Manual page 72

Advanced CMOS Setup,
IDE CONFIGURATION SCREEN
IDE Configuration Settings You can use this screen to select options for the IDE Configuration Settings. Use
the up and down arrow keys to select an item, and the plus (+) and minus (-) keys to change
the option setting. A description of the selected item appears on the right side of the
screen. The settings are described on the following pages. The screen is shown below.
Advanced
IDE Configuration
-----------------------------------------
---
OnBoard IDE Controller
IDE BusMaster
Ultra DMA-66 Detect Override
------------------------------------------
--
> Primary IDE Master
> Primary IDE Slave
> Secondary IDE Master
CDROM
> Secondary IDE Slave
Detected
------------------------------------------
--
Hard Disk Write Protect
ATAPI Detect Time Out (Seconds)
©Copyright 1985-1999, American Megatrends, Inc.
Onboard IDE Controller This option specifies the IDE channels used by the onboard IDE controller. The
settings are Disabled, Primary, Secondary, or Both. The Optimal and Fail-Safe default
settings are Both.
66 MegaDual PCI Motherboard User's Guide
Continued
BIOS SETUP UTILITY
Both
Enabled
Disabled
: Hard Disk
: Not Detected
: ATAPI
: Not
Disabled
35
Disabled,
disables the
integrated IDE
Controller.
Primary, enables
only the Primary
IDE Controller.
Secondary,
enables only the
Secondary IDE
Controller. Both,
enables both IDE
Controllers.
Select Screen
Select Item
Enter Go to Sub
Screen
F1 General Help
F8 Load Failsafe
F9 Load Optimal
F10 Save and Exit
ESC Exit
Cont'd