Displaying Or Hiding All Name Information - American Dynamics SpeedDome Ultra 8 Operator's Manual

Figure 60. Example of Zoom, Auto Iris, and Auto Focus Status Information
Changing the Display of Status Information
1. Select On-Screen Text Display from the Dome Configuration Menu.
The highlight bar appears on Status Display.
2. Change the setting.
• Select On to display dome status information on the monitor.
• Select Off to prevent dome status information from appearing on the monitor.
The default setting is Off.
3. Select Exit. The Dome Configuration Menu appears.

Displaying or Hiding All Name Information

The dome provides the ability to display the dome name, the area where the dome is pointing,
the name of the preset or pattern that is running, and alarm names. When the display of camera
or area names is enabled, the information appears on the screen continuously. Preset, pattern,
and alarm names appear only while they are active.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
ZOOM X140D
AUTO IRIS OFF
AUTO FOCUS ON
Note: Displaying status information is separate from displaying name information.
If the Disable All Names? setting is set to Yes, the status information still
appears if Status Display is set to On.
72 of 140
8200-0600-01, REV. B