American Dynamics SpeedDome Ultra 8 Operator's Manual page 118

If you want to ...
Select the highlighted character in the character field.
Move the cursor to the right of the current character in
the name or password.
Move the cursor to the left of the current character in
the name.
Additional AD-UTC Commands
The following tables summarize the special commands available when using the dome in an
AD-UTC network. These commands are available when you enter the keyboard combination
provided.
If you want to ...
Program selected Preset
Recall selected Preset
Start selected Pattern programming
Save Pattern programming
Run selected Pattern continuously
Resume Auto Focus mode
Resume Auto Iris mode
Rotate dome 180° from current position ("flip")
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Use ...
(Focus Far or Focus Near)
Twist joystick clockwise
Twist joystick counter-clockwise
Use ...
(Function, Preset number (1-96),
and then Preset)
Preset number,
(Preset number, then Preset)
(Function, pattern number (1-3),
then Shift+Preset)
Pattern number,
(Pattern number (1-3), then
Function)
Pattern number, then
(Pattern number, Shift and Preset)
(Function+Focus Far or
Function+Focus Near)
(Function+Iris Open or
Function+Iris Close)
116 of 140
or
(Zoom In) or
(Zoom Out) or
, Preset number,
F
, pattern number,
F
F
and
+ or +
F F
+ or +
F F
(Flip)
+
8200-0600-01, REV. B