American Dynamics SpeedDome Ultra 8 Operator's Manual page 70

AD-UTC Command Summary
Table 7 lists the commands to operate the configuration utility in AD-UTC environment. The
keyboard must be in programming mode to perform these functions.
Command
,
F
(Function, and then
Shift+Menu)
Joystick
(Pan/Tilt)
(Focus Far)
Or
(Focus Near)
(Zoom In) or Twist
joystick clockwise
(Zoom Out) or Twist
joystick counterclockwise
,
F
(Function, and then
Shift+Clear)
When setting names or entering password information, the screen displays the available
characters in the selected language. Table 8 provides the name programming and password
entry commands:
Command
Joystick Left/Right
Joystick Up/Down
(Focus Far)
Or
(Focus Near)
(Zoom In) or Twist
joystick clockwise
(Zoom Out) or Twist
joystick counterclockwise
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Table 7. AD-UTC commands summary
Function
Start the configuration utility.
+
Move the highlight bar on the active menu.
Select the highlighted item on the active menu.
Increase the value of the selected setting.
Display the next choice for the setting.
Decrease the value of the selected setting.
Display the previous choice for the setting.
Save changes and exit the utility from any screen.
+
Table 8. Name Programming/Password Entry Commands
Function
Move the highlight left or right in the character field.
Move the highlight up or down in the character field.
Select the highlighted character in the character field.
Move the cursor to the right of the current character in
the name or password.
Move the cursor to the left of the current character in
the name.
68 of 140
8200-0600-01, REV. B