American Dynamics SpeedDome Ultra 8 Operator's Manual page 121

DirectSet Command / Menu Item
3+
4+
5+
6+
7+
10+
11+
12+
13+
14+
15+
16+
17+
20+
48+
49+
50+
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
: Flip
: Peel Pattern
: Set North Position
: Line Lock Off
: Line Lock On
: Night Mode
: Day Mode
: Auto/Day Night Mode
: WDR On
: WDR Off
: Smooth Scan
: Stepped Scan
: Random Scan
: Dome Information
: EIS Off:
: EIS 5Hz
: EIS 10Hz
119 of 140
Description
(35X/22X) Rotates the SpeedDome 180° from its current
pointing direction. This is the same as pressing the Flip
button.
(35X/22X) Runs the default Apple Peel Pattern
continuously.
(35X/22X) Sets the North Position
(35X/22X) Turns the Line Lock Off
(35X/22X) Turns the Line Lock On
(35X) Sets the dome IR mode setting to ON. The dome
switches to full-time black-and-white (B/W) mode.
(35X) Sets the dome IR mode setting to OFF. The dome
switches to full-time color mode.
(35X) Resumes the most recently selected automatic IR
mode setting.
Auto High: B/W mode activates ~30 lux.
Auto Mid: B/W mode activates ~3 lux.
Auto Low: B/W mode activates ~ .5 lux
(35X) Enables Wide Dynamic Range (WDR). Use this
setting when both bright and low light areas need to be
viewed simultaneously.
(35X) Disables Wide Dynamic Range (WDR). Use this
setting when the light level is constant or changes in
lighting conditions are gradual.
(35X/22X) Initiates a smooth scan between the left and
right scan limits, starting at the left scan limit. If no scan
limits have been set, initiates a smooth 360° clockwise
rotation around the dome axis using the current tilt, zoom
and focus settings.
(35X/22X) Initiates a scan between the left and right scan
limits pausing briefly every 10° (at 1x zoom), starting at the
left scan limit. When the right scan limit is reached, the
scan is reversed. If no scan limits have been set, initiates a
clockwise rotation around the dome axis pausing briefly
every 10° (at 1x zoom) for 3 seconds using the current tilt,
zoom and focus settings.
(35X/22X) Initiates a scan between the left and right scan
limits pausing randomly between the limits. If no scan
limits have been set, initiates a clockwise or counter-
clockwise rotation around the dome axis using the current
tilt, zoom and focus settings. The dome pauses randomly as
it rotates around the axis.
(35X/22X) Displays the Dome Information screen available
through the dome configuration menu.
(35X) EIS Off:
(35X) EIS 5Hz
(35X) EIS 10Hz
8200-0600-01, REV. B