American Dynamics SpeedDome Ultra 8 Operator's Manual page 28

4. Use the joystick to highlight each field (Focus, Iris, EIS, and IR Mode). Select either On
of Off as your global camera default setting for each field.
5. Use the joystick to highlight Exit, and press Focus Far to select. When you reach the
Dome Configuration Menu, highlight Exit and Save Changes, and press Focus Far.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Note: The EIS, WDR, and IR mode features are only available on 35X camera
domes. These features do not appear on the 22X camera dome Camera Functions
menu.
Figure 16. Return to Auto screen (22X)
RETURN TO AUTO
FOCUS
IRIS
RESET TO FACTORY SETTINGS
Note: The Reset to Factory Settings field resets only the fields on the Return
To Auto screen.
26 of 140
ON
ON
EXIT
8200-0600-01, REV. B