American Dynamics SpeedDome Ultra 8 Operator's Manual page 98

3. The dome verifies that its configuration data matches the configuration data stored in the
IO base. If the data does not match, then the dome copies and uses the IO base data. The
Restoring Dome Data screen (Figure 88) briefly appears.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Figure 87. Updating IO Base Memory screen
Updating IO Base Memory!
Please Wait!
Figure 88. Restoring Dome Data screen
Restoring Dome Data
Names Buffer
TPB Buffer
Note: After the verification tests are completed, the last screen displayed before
the dome was powered down will reappear.
96 of 140
8200-0600-01, REV. B