American Dynamics SpeedDome Ultra 8 Operator's Manual page 101

VM8
Supported Protocol
Maximum Presets
(1)
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Apple Peel only. Programmable patterns are not
available.
VM16/ADTT16 (White Touch Tracker)
Supported Protocols
Maximum Presets
(2)
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
VM16E/ADTT16E (Black Touch Tracker)
Supported Protocols
Maximum Presets
(2)
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
(3) Requires firmware version 0701-2833-0103
(EEPROM) / 0701-2834-0201 (Flash PROM) or
newer.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
SensorNet
0
1
Not supported
1-8
SensorNet
(1)
RS-422
96 – SensorNet
4 – RS-422
3
Not supported
1-16
SensorNet
(1)
RS-422
96 – SensorNet
4 – RS-422
3
(3)
Yes
1-16 or
(3)
1-64
VM32/AD32
Supported Protocols
Maximum Presets
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
VM96
(1)
Supported Protocols
Maximum Presets
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires software version 5.2 or newer.
(2) Preset information is stored at the host, not the dome.
(3) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
99 of 140
SensorNet
(1)
RS-422
96 – SensorNet
4 – RS-422
(2)
3
Not supported
1-32
SensorNet
RS-422
(2)
Unlimited
(3)
3
Not supported
1-96
8200-0600-01, REV. B