Displaying Or Hiding All Name Information - American Dynamics SpeedDome Ultra VII RAS917LS Configuration

Displaying or Hiding All Name Information

The dome provides the ability to display the dome name, the area where the dome is pointing, the
name of the preset or pattern that is running, and alarm names. When the display of camera or area
names is enabled, the information appears on the screen continuously. Preset, pattern, and alarm
names appear only while they are active.
Figure 5–2: Display Locations for Name Information
You may choose to disable displaying all name information, or you may choose to display selected or
all name information.
Changing the Display of All Name Information
1. Select On-Screen Text Display from the Dome Configuration Menu.
2. Move the highlight to Disable All Names?
3. Change the setting.
•
Select Yes to disable the appearance of all name information.
•
Select No to enable the appearance of all or some name information. Then continue with
Configuring the Display of Name Information on page 5–6.
The default setting is No.
4. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page
5–11.
Configuring Text Displayed On-Screen
CAMERA NAME
PRESET NAME/PATTERN NAME
ALARM NAME
AREA NAME
5–3