American Dynamics SpeedDome Ultra 8 Operator's Manual page 25

If Freeze Frame is disabled, each time the dome points to a different preset, you will see the
dome movement to the new scene, as well as any lens adjustments that are required. For
example, if the dome is currently pointing at Reception Desk, and the preset number assigned
to the Entry is selected, you will see a blur of motion as the dome quickly pans past other areas
in the lobby before focusing on the Entry scene.
If Freeze Frame is enabled, the current scene is displayed on-screen until all dome movement
and lens adjustments are complete. For example, the Reception Desk scene will be frozen
on-screen until the dome completes the movement and lens adjustments necessary to display
the selected preset. When the adjustments are finished, the Entry scene is automatically
displayed.
Changing the Freeze Frame Setting
1. Select Pan/Tilt/Zoom/Sync Opts from the Dome Configuration Menu.
2. Move the highlight bar to Freeze Frame. Change the setting.
• Select On to enable Freeze Frame. This freezes the current scene when presets or
patterns are selected.
•
Select Off to disable Freeze Frame. This displays the dome motion and lens adjustments
when presets or patterns are selected.
The default setting is Off.
3. Select Exit. The Dome Configuration Menu appears.
SPEEDDOME ULTRA 8 CONFIGURATION UTILITY
OPERATOR'S GUIDE
Figure 12. Lobby Floor Plan
Waiting
Area
Reception
Desk
23 of 140
Dome
Elevator
Hallway
8200-0600-01, REV. B