Table of Contents
Advertisement
20
Removing the Front Panel
The front cover may be removed to access the components. This is required when relocating the
electrical or gas inlet location. To remove the front cover
(a) Remove the center wingnuts.
(b) Loosen the two outer screws.
(c) Rotate the front panel down.
(d) Remove the front cover.
© Travis Industries
Installation
(for qualified installers only)
1/4" Nutdriver/Wrench
11/9/20 - 1478
PB 72 GSB2/GSR2 Aust.
Advertisement
Table of Contents
