Table of Contents
Advertisement
Diffuser
A diffuser is built into the appliance to adjust the flow rate of exhaust gases. Depending upon the vent
configuration, you may be required to adjust the diffuser to the open position (see illustration below).
The charts for vent configurations detail the correct diffuser position.
© Travis Industries
Installation
(for qualified installers only)
DIFFUSER SIDE VIEW
Before (Closed - Stock)
After (Open)
Remove the diffuser.
1/4" Nutdriver
11/9/20 - 1478
Bend the round portion of the
diffuser so it is flat (open).
Secure the flattened
diffuser plate with the
screws removed earlier.
PB 72 GSB2/GSR2 Aust.
27
Advertisement
Table of Contents
