Table of Contents
Advertisement
50
3. Remove both burners. Each is held in place with 6 screws (1/4" nutdriver).
4. Use a ¼" nut driver to remove (4) screws (2 per side) securing the air shutter retainers (left and right)
to the fireplace. Remove retainers to gain access to the burner orifices (set the retainers and screws
aside for reinstallation).
© Travis Industries
Installation
(for qualified installers only)
Remove (4 screws)
Remove air shutter retainers
to gain access to the orifices
11/9/20 - 1478
PB 72 GSB2/GSR2 Aust.
Advertisement
Table of Contents
