Table of Contents
Advertisement
Do Not Drill or Screw Zone
When using screws to secure tile-board or other non-combustible to the front of the fireplace, make sure
to avoid the area on the front of the fireplace that is painted with the "DO NOT DRILL" shading. Make
sure screws penetrate no more than ½" (13mm) into the fireplace.
Do not drill or screw in
the marked area
© Travis Industries
Installation
(for qualified installers only)
11/9/20 - 1478
37
PB 72 GSB2/GSR2 Aust.
Advertisement
Table of Contents
