Lopi Pro Builder 72 Linear GSB2 Installation Manual page 36

36
Screen Assembly Mounts
The screen assembly mounts (located on outer front edges of the fireplace) are adjustable to allow the
screen assembly to be positioned 1/2" to 1-/12" from the front of the fireplace. This allows facing to tuck
under the screen assembly. Each mount is held in place by (3) Philips head screws. Before mounting
the screen assembly, adjust the mounts so that the front edge is flush with the finish material surrounding
the fireplace. To adjust the mounts, loosen the screws, slide the mounts to the desired position, then
tighten the screws.
© Travis Industries
Installation
(for qualified installers only)
Thin Facing (1/2" 13mm) - Top View
Fireplace
Screen Assembly
Mount
Thick Facing (1" 26mm) - Top View
Fireplace
Screen Assembly
Mount
Framing
Max. 1/2" (13mm) Overlap
Framing
Max. 1/2" (13mm) Overlap
11/9/20 - 1478
Position edge of mount
flush with finish material
Drywall
Drywall
PB 72 GSB2/GSR2 Aust.