To Adjust The Image Density In The Toner Saving Mode - Toshiba e-STUDIO2010AC Imaging Manual

3.8.2

To Adjust the Image Density in the Toner Saving Mode

Before adjustment
The image density is too dark, even when
printing is performed in the toner saving
mode.
 Explanation
The product offers a toner saving mode. It is intended to automatically decrease the image density and
reduce the amount of toner used. Adjust the upper limit of the image density in the toner saving mode, in
order to obtain the desired image density requested by a particular user.
 Procedures
The service technician must perform all adjustments.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
After adjustment
The image density in the toner saving
mode is adjustable, as desired.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-81
3.Printer-specific Adjustments