Toshiba e-STUDIO2010AC Imaging Manual page 296

4.e-Filing-specific Adjustments
 Explanation
If a full-color image is printed on a client PC and stored in the e-Filing box (Print to Box), it will be
optimized for printing on paper. This is the reason why the image stored in the e-Filing box looks slightly
different in the color balance from the original displayed on the computer monitor. Change the "Image
Quality Type" setting on the printer driver, in order to minimize the difference in the color balance and
closely match the color balance of the image stored with that of the original.
 Procedures
Both the service technician and the user can perform all adjustments.
Print to Box PCL PS XPS
*This adjustment will have an effect only on the image stored in the Auto mode or the Color mode.
(1) Open the property page of the printer driver. Select "General" from among the "Image Quality Type"
options in the Image Quality tab.
• "General" allows the image to be stored in colors, which are closely matched with the original,
compared to the other Image Quality Type options.
 Caution after the adjustment
Nothing in particular.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
4-6