Toshiba e-STUDIO2010AC Imaging Manual page 100

2.Copier-specific Adjustments
Soft
Default:
Setting value "103":
<Note>
• "Minimizing moiré" and "Sharpening the copy image" are mutually contradictory. When the
adjustment is performed to minimize moiré, the resolution of the copy image may decrease.
 Caution after the adjustment
Nothing in particular.
 Remarks
Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may
cause a loss in MFP performance, including degradation in the image quality.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
-4 -3 -2 -1 0
| | | | |
-100 -75 -50 -25 0
-100 -100 -75 -50 -25
Since "-25" is assigned to the center, the image quality
remains the same even if the indicator is changed from "-3" to
"-4".
2-46
+1 +2 +3 +4
Sharp
| | | |
+25 +50 +75 +100
0 +25 +50 +75
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Assigned
adjustment value
of sharpness